OFFICIAL TECHNICAL REFERENCE
Minoston MP22ZD User Guide & Tech Specs
Z-Wave 800 Series Outdoor Dimmer Plug Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MP22ZD is an outdoor Z-Wave 800 Series dimmer plug designed for reliable, secure control of landscape lighting. Operating at 908.42 MHz, it drives up to 400W incandescent or 150W dimmable LED and CFL, with adjustable minimum and maximum brightness inside an IP65 housing. With Z-Wave Long Range support, it can reach up to 1,300 feet when paired with a compatible LR hub in ideal conditions. S2 authenticated security and SmartStart simplify secure setup, while ETL listing and FCC Part 15B provide added peace of mind. Compatible with Z-Wave hubs such as SmartThings, Hubitat, Vera, Fibaro, and HomeSeer., it enables dimming schedules, scenes.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Z-Wave 800 Series (S2 · SmartStart · Long Range · Dimming)
WORKING FREQUENCY
908.42 MHz (US Region)
MAX ELECTRICAL LOAD
400W Incandescent / 150W Dimmable LED-CFL
WIRELESS RANGE
Up to 1,300 ft (LR) · 150 ft (Mesh)
SAFETY CERTIFICATIONS
FCC Part 15B · ETL Listed
Step-by-Step Video Tutorials
Visual walkthroughs for installation, pairing, and hardware operation.
HUB & ECOSYSTEM COMPATIBILITY
Integration drivers and feature support across major certified platforms.
Native Z-Wave JS
Home Assistant
Brightness plus night-light, speed and min/max brightness
Edge Driver
SmartThings
Minoston channel exposes Param 7 through 12
Built-in Dimmer Driver
Hubitat
Works out of box, Minoston driver adds brightness limits
S2 Verified
Amazon Alexa
Dimming via controller, Alexa sets percentage once exposed
Physical Installation & Safety
01
Step 1: Choose the Right Location
Mount on a GFCI-protected outlet under an eave, 2 ft above grade, clear of sprinkler spray and of the fixture's own light.
02
Step 2: Mount the Plug
Hook the keyhole slot over the supplied screw and anchor so the plug never sits face up.
03
Step 3: Connect the Load
Plug the dimmable fixture into the plug's own outlet and cap the unused socket.
04
Step 4: Verify Dimming
Sweep from 100% to the lowest level and raise the minimum brightness parameter until the fixture stops flickering.
Z-WAVE CONFIGURATION PARAMETERS
Internal register dictionary and setting options for customization.
| Parameter / Setting | Size / Type | Values & Description |
|---|---|---|
| Param 2 | 1 Byte | Default:0 (0: LED on when light off, 1: LED on when light on, 2: always off, 3: always on) |
| Param 4 | 4 Byte | Default:0 (0: disabled, 1-65535: auto turn-off minutes) |
| Param 8 | 1 Byte | Default:2 (0: output off, 1: output on, 2: out put the state after power) |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Solid blue | powered |
| Blinking blue | inclusion |
| Purple | exclusion |
| Hardware Factory Reset | Press 2x quickly, hold 3rd press 10s until LED flashes once |
Network Pairing Walkthrough
Recommended steps for smart network inclusion and initial setup.
01
Step 1: Scan the DSK Before Mounting
Pair near the hub first, then scan the 25-digit DSK code on the packaging box; mounting it outside before pairing is the usual failure.
02
Step 2: Power On and Wait
Plug it into the GFCI outlet and leave it; SmartStart joins within 10 minutes, with the blue LED blinking during the interview.
03
Step 3: Tune the Parameters
Set Param 11 for minimum and Param 12 for maximum brightness, then Param 7 for the night light.
04
Step 4: Test Dimming and Automation
Run a full sweep in the mounted position and confirm no flicker at the low end.
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: Which hubs support the outdoor dimmer?
A: Any certified Z-Wave controller, including SmartThings, Hubitat and Home Assistant. On SmartThings install the Minoston Edge driver so the multilevel capability is exposed properly.
Q: The lights flicker or strobe at low brightness.
A: Landscape LED fixtures are frequently not dimmable, and no parameter fixes that. Confirm the fixture is dimmable, then raise Param 11. If it still strobes, the transformer is the problem.
Q: How far can it be from the hub outdoors?
A: 100 ft mesh, 1,300 ft line of sight on Long Range. Metal fixture housings and exterior walls both cut range, so keep the plug clear of the transformer box.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MP22ZD:
Minoston MP22ZD Official User Manual
Model: MP22ZD · Installation & Parameter Specs