OFFICIAL TECHNICAL REFERENCE
Minoston MR40Z User Guide & Tech Specs
Z-Wave 800 Series 4-Button Scene Remote Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MR40Z is a Z-Wave 800 Series battery scene controller designed for reliable, secure button-driven automation. Operating at 908.42 MHz, it runs on two CR2032 cells, switches no load itself, and offers four programmable buttons on a magnetic base. With Z-Wave Long Range support, it can reach up to 1,300 feet when paired with a compatible LR hub in ideal conditions. S2 authenticated security and SmartStart simplify secure setup, while FCC Part 15B and Z-Wave Plus certification confirm US radio compliance and interoperability. Compatible with Z-Wave hubs such as SmartThings, Hubitat, and Home Assistant, it triggers scenes, dimming levels and routines from anywhere in the room.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Z-Wave 800 Series (S2 · SmartStart · Battery Scene Controller)
WORKING FREQUENCY
908.42 MHz (US Region)
MAX ELECTRICAL LOAD
Battery Device / 2x CR2032 / No Load Switching
WIRELESS RANGE
Up to 1,300 ft (LR) · 150 ft (Mesh)
SAFETY CERTIFICATIONS
FCC Part 15B · ETL Listed
Step-by-Step Video Tutorials
Visual walkthroughs for installation, pairing, and hardware operation.
HUB & ECOSYSTEM COMPATIBILITY
Integration drivers and feature support across major certified platforms.
Native Z-Wave JS
Home Assistant
Full parameter access, no custom driver required
Edge Driver
SmartThings
Standard SmartThings edge switch driver with power reporting
Built-in Driver
Hubitat
Generic Z-Wave Plus outlet with auto-off timer
S2 Authenticated
Amazon Alexa
Voice control via connected hub, no direct cloud path
Physical Installation & Safety
01
Step 1: Mount the Base
Fix the magnetic bracket to the wall with the screws or adhesive pad.
02
Step 2: Insert the Batteries
Open the back cover and insert two CR2032 coin cells with the positive face (+) up.
03
Step 3: Snap into the Base
Align the remote over the magnetic bracket; it snaps into place and lifts off easily for handheld use.
04
Step 4: Confirm Battery
Press any button; the blue LED blinks once to confirm power.
Z-WAVE CONFIGURATION PARAMETERS
Internal register dictionary and setting options for customization.
| Parameter / Setting | Size / Type | Values & Description |
|---|---|---|
| Param 3 | 1 Byte | Default:1 (Value: 0 disabled, 1 blue, 2 green, 3 red, 4 magenta, 5 yellow, 6 cyan, 7 white) |
| Param 4 | 1 Byte | Default:1 (Value: 0-100% LED brightness) |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Blinking blue | Joining or waking |
| Single flash | Button press sent |
| Hardware Factory Reset | Press and hold Button 4 for 10s until the LED flashes red |
Network Pairing Walkthrough
Recommended steps for smart network inclusion and initial setup.
01
Step 1: Scan the DSK Code
Use a SmartStart-enabled hub to scan the Z-Wave QR code on the back of the remote or the packaging box before fitting the batteries.
02
Step 2: Fit the Batteries to Join
Insert both CR2032 cells and leave the remote still; SmartStart adds it within 10 minutes, with the LED flashing blue during the interview.
03
Step 3: Assign the Scenes
Map a scene to each of the four buttons and set Param 3 and Param 4 for the indicator colours.
04
Step 4: Test the Buttons
Press each button and confirm its scene fires, then pull a battery to check the hub reports it offline.
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: Which hubs use it as a scene controller?
A: SmartThings, Hubitat, Home Assistant and Vera map the four buttons to central scene commands. Older controllers such as the ISY994i will include it but expose only the battery and a limited button set.
Q: The buttons stopped reporting after a few months.
A: Usually battery or firmware, not hardware. Replace both cells, then re-interview the device. If the LED flashes on every press but no scene arrives, the association to the hub was lost and needs re-adding.
Q: Will it reach through a wall?
A: It is a battery device, so it does not repeat and relies entirely on the mesh around it. Add a mains-powered device between the remote and the hub if the room is on the far side of the house.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MR40Z:
Minoston MR40Z Official User Manual
Model: MR40Z · Installation & Parameter Specs
Minoston MR40Z Firmware (V8.2)
Official OTA update package