OFFICIAL TECHNICAL REFERENCE
Minoston MP21ZP User Guide & Tech Specs
Z-Wave 800 Series Energy Monitoring Smart Plug Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MP21ZP is a Z-Wave 800 Series smart plug with built-in energy monitoring, designed to make home automation smarter and more efficient. Operating at 908.42 MHz, it supports up to 15A/1,875W resistive loads and provides real-time energy usage tracking. Its built-in Z-Wave repeater helps extend your mesh network coverage, improving connectivity throughout your home. S2 security and FCC and ETL certifications provide added security and peace of mind. Compatible with Z-Wave hubs such as SmartThings, Hubitat, Vera, Fibaro, and HomeSeer, the MP21ZP enables remote on/off control, scheduling, and convenient energy monitoring from your connected smart home system.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Z-Wave 800 Series (S2 · SmartStart · Energy Metering)
WORKING FREQUENCY
908.42 MHz (US Region)
MAX ELECTRICAL LOAD
15A 1875W Resistive / 10A 1250W Tungsten / 1/2 HP
WIRELESS RANGE
Up to 1,300 ft (LR) · 150 ft (Mesh)
SAFETY CERTIFICATIONS
FCC · Z-Wave Plus
Step-by-Step Video Tutorials
Visual walkthroughs for installation, pairing, and hardware operation.
HUB & ECOSYSTEM COMPATIBILITY
Integration drivers and feature support across major certified platforms.
Native Z-Wave JS
Home Assistant
Power, voltage, current and kWh entities, no custom driver
Edge Driver
SmartThings
Minoston channel required to expose metering capabilities
Built-in Generic Driver
Hubitat
On/off only, import Minoston driver for watts
S2 Verified
Amazon Alexa
On/off via controller, energy figures stay in the hub app
Physical Installation & Safety
01
Step 1: Choose the Right Location
Pick an indoor grounded 125 V receptacle clear of metal enclosures that would distort the current reading.
02
Step 2: Plug Into the Wall Receptacle
Push the plug fully in until it sits flush; a loose fit adds contact resistance and skews the meter.
03
Step 3: Connect the Load
Plug the appliance into the plug's own outlet and let it run a full minute before trusting the wattage.
04
Step 4: Verify Power and Metering
Compare the reported wattage against the appliance nameplate and confirm the kWh counter climbs.
Z-WAVE CONFIGURATION PARAMETERS
Internal register dictionary and setting options for customization.
| Parameter / Setting | Size / Type | Values & Description |
|---|---|---|
| Param 1 | 1 Byte | Default:0 (0: LED on when load on, 1: LED on when load off, 2: always off, 3: always on) |
| Param 5 | 1 Byte | Default:5W (report only when reading moves by this much) |
| Param 4 | 1 Byte | Default:0 (0:Memory, 1:Output Off, 2:Output On) |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Solid blue | powered & on |
| Blinking blue | inclusion |
| Blinking purple | exclusion |
| Hardware Factory Reset | Press 2x quickly, hold 3rd press 10s; a 10x press clears kWh without resetting the network |
Network Pairing Walkthrough
Recommended steps for smart network inclusion and initial setup.
01
Step 1: Scan the DSK Code
Open the hub's SmartStart screen and scan the 25-digit DSK code on the packaging box.
02
Step 2: Power On and Wait
Plug it in and leave it; SmartStart joins within 10 minutes, with the blue LED blinking while the hub interviews it.
03
Step 3: Tune the Parameters
Set Param 5 for the report threshold, Param 6 for the report interval and Param 12 for the kWh push rate.
04
Step 4: Test Metering and Automation
Run the appliance and confirm both wattage and kWh move, then check the standby draw.
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: Hub shows a switch but no power figures.
A: The stock handler only maps on/off. Install the Minoston Edge driver (SmartThings) or Minoston driver (Hubitat) and re-add the device so metering capabilities are exposed.
Q: Wattage jumps around or sits at zero.
A: Raise Param 5 so small fluctuations stop triggering reports. Resistive loads read cleanly, switching supplies always look noisy.
Q: Does metering work in Long Range mode?
A: Yes. Long Range changes the radio path, not the command classes. You need a Long Range-capable hub, and it will not route through mesh repeaters.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MP21ZP:
Minoston MP21ZP Official User Manual
Model: MP21ZP · Installation & Parameter Specs