Minoston Z-Wave Smart Plug Energy Power Monitor 800 Series for Indooor (MP21ZP)

Minoston Z-Wave Smart Plug Energy Power Monitor 800 Series for Indooor (MP21ZP)

Product form

$26.34

["ENERGY MONITORING INDOOR PLUG"] SKU: MP21ZP
Quantity
−
+
Add to Cart
Buy It Now
Buy on Amazon
Description
Specifications
FAQ
Shipping & Returns
Warranty Registration
  • [Reliabble 800 Series Z-wave smart Plug] Built-in an 800 series chip. This 800 series zwave plug has better signal coverage than ever, and faster communication, with S2 authenticated security and SmartStart for effortless pairing. Extend the wireless coverage up to 1300ft if your hub supports Long Range.
  • [Power Meter Z-Wave Plug] Supports check the power or energy usage on the app. It helps to analyze electricity consumption so that you can understand the structure of your electricity consumption and reduce it.
  • [Easy to Setup and High Security] SmartStart pre-programmed zwave plug only needs to be scanned and press the button 3 times to add devices (Less than 1 min). The high security of S2 ensures your privacy and is not easily attacked by hackers.
  • [Wireless and Voice Control] Connect the zwave plug to the z-wave hub (sold separately) and then you can use an app to remotely control it through the z-wave controller. Compatible with Alexa and Google Assistant(hub required). Voice control it by saying "Adjust light to 75% brightness."
  • [Timer Schedule] Support timer and schedule setting. Allow the zwave dimmer plug to be turned on or off automatically, or adjust to a specific brightness at a specific time.
  • [Require a Z-Wave Hub (sold separately)] This zwave plug is compatible with SmartThings, Hubitat, Vera, Wink, Z-Box Hub, Fibaro, Ring, 2GIG, HomeSeer, ect.CANNOT connect directly with ECHO PLUS!
PDF
Minoston Z-Wave Smart Plug Energy Power Monitor 800 Series for Indooor (MP21ZP) User Manual
Official Installation, Pairing & Full Specification Guide
Quick Setup & SmartStart Pairing
A Z-Wave hub, plus an outlet within 3 ft of it. Up to 15A / 1875W, which covers window AC units and space heaters. Your hub has to support Z-Wave S2. Anything sold in the last few years does. 1. Open your hub app and start Add Device. Hubitat: Devices > Add Device > Z-Wave. SmartThings: + > Add Device > Z-Wave. 2. Plug it in while the hub is searching. The status light blinks fast, then stops when it is paired. 3. Check the app for a new plug, then rename it. Energy use is on the device page.

Recently viewed products

    © 2026 Minoston, Powered by Shopify