OFFICIAL TECHNICAL REFERENCE
Minoston MP31Z User Guide & Tech Specs
Z-Wave 800 Series Mini Smart Plug Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MP31Z is a compact Z-Wave 800 Series smart plug designed for reliable, secure home automation. Operating at 908.42 MHz, it supports a maximum resistive load of 15A/1,875W and features a built-in signal repeater to help extend your Z-Wave network. With Z-Wave Long Range support, it can reach up to 1,300 feet when paired with a compatible LR hub in ideal conditions. S2 authenticated security and SmartStart simplify secure setup, while ETL certification provides added peace of mind. Compatible with Z-Wave hubs such as SmartThings, Hubitat, Vera, Fibaro, and HomeSeer, it enables convenient remote on/off control and scheduling.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Z-Wave 800 Series (S2 · SmartStart · Long Range Ready)
WORKING FREQUENCY
908.42 MHz (US Region)
MAX ELECTRICAL LOAD
15A 1875W Resistive / 10A 1250W Tungsten / 1/2 HP
WIRELESS RANGE
Up to 1,300 ft (LR) · 150 ft (Mesh)
SAFETY CERTIFICATIONS
FCC · Z-Wave Plus
Step-by-Step Video Tutorials
Visual walkthroughs for installation, pairing, and hardware operation.
HUB & ECOSYSTEM COMPATIBILITY
Integration drivers and feature support across major certified platforms.
Native Z-Wave JS
Home Assistant
Full parameter access, no custom driver required
Edge Driver
SmartThings
Install Minoston channel for metering & multi-channel
Built-in Generic Driver
Hubitat
Import Minoston driver for full attributes
S2 Verified
Amazon Alexa
Pair through any certified Z-Wave controller
Physical Installation & Safety
01
Step 1: Choose the Right Location
Pick an indoor grounded 125 V receptacle clear of metal furniture and away from damp areas.
02
Step 2: Plug Into the Wall Receptacle
Push the plug fully in until it sits flush against the plate, with no power strip or extension cord in between.
03
Step 3: Connect the Load
Plug the lamp or appliance into the plug's own outlet and keep the total draw within 15 A / 1875 W.
04
Step 4: Verify Power and Control
Press the button once and confirm the relay clicks and the LED lights, then toggle the same outlet from the hub.
Z-WAVE CONFIGURATION PARAMETERS
Internal register dictionary and setting options for customization.
| Parameter / Setting | Size / Type | Values & Description |
|---|---|---|
| Param 1 | 1 Byte | Default 0 0: LED on when the load is on. 1: LED on when the load is off. 2: LED disabled. |
| Param 2 | 4 Bytes | Default 0 0: disabled. 1 to 65535: auto turn-off after that many minutes. |
| Param 6 | 1 Byte | Default 2 0: always off after an outage. 1: always on. 2: restore previous state. |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Solid blue | powered & on |
| Blinking blue | inclusion |
| Purple | exclusion |
| Red | network operation failed |
| Hardware Factory Reset | Press 2x quickly, hold 3rd press 10s until LED flashes once |
Network Pairing Walkthrough
Recommended steps for smart network inclusion and initial setup.
01
Step 1: Scan the DSK Code
Open the hub's SmartStart or QR scan screen and scan the 25-digit DSK code printed on the packaging box.
02
Step 2: Power On and Wait
Plug it in and leave the button alone; SmartStart completes inclusion within 10 minutes, with the blue LED blinking during the interview.
03
Step 3: Tune the Parameters
Set Param 1 for LED mode, Param 2 for the auto-off timer and Param 6 for outage memory.
04
Step 4: Test Control and Automation
Press the button once to confirm the relay, then run one scene or schedule from the hub.
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: Does the MP21Z need a hub?
A: Yes. It is Z-Wave, not Wi-Fi, so it needs a certified controller such as SmartThings, Hubitat, Home Assistant with a Z-Wave stick, Vera or Amazon Alexa. Alexa and Google only reach it through that hub.
Q: It stopped responding and the LED is dark, what now?
A: Press once to wake it, then unplug for 30s and reseat. If still dark, press 2x quickly and hold the 3rd press 10s to reset, then re-include. Persistent failure means replacement.
Q: How far does it reach, and does Long Range help?
A: 150 ft to the nearest mesh node, 1,300 ft line of sight on Long Range. Long Range needs a capable hub and cannot use mesh repeaters.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MP31Z:
Minoston MP31Z Official User Manual
Model: MP31Z · Installation & Parameter Specs