OFFICIAL TECHNICAL REFERENCE
Minoston MP31ZD User Guide & Tech Specs
Z-Wave 800 Series Smart Dimmer Plug Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MP31ZD is a compact Z-Wave smart dimmer plug designed to bring convenient lighting control to your smart home. Featuring a Z-Wave 800 Series chip and operating at 908.42 MHz, it supports dimmable incandescent bulbs up to 200W and dimmable LED/CFL bulbs up to 100W. Its built-in signal repeater helps extend Z-Wave mesh network coverage, with a range of up to 1,300 feet when paired with a compatible Long Range hub. S2 authenticated security helps protect wireless communication. FCC and ETL listings should be verified against the specific model documentation. Compatible with Z-Wave hubs such as SmartThings, Hubitat, Vera, Fibaro, and HomeSeer.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Z-Wave 800 Series (S2 · SmartStart · Multilevel Dimming)
WORKING FREQUENCY
908.42 MHz (US Region)
MAX ELECTRICAL LOAD
200W Incandescent / 100W Dimmable LED-CFL
WIRELESS RANGE
Up to 1,300 ft (LR) · 150 ft (Mesh)
SAFETY CERTIFICATIONS
FCC · Z-Wave Plus
Step-by-Step Video Tutorials
Visual walkthroughs for installation, pairing, and hardware operation.
HUB & ECOSYSTEM COMPATIBILITY
Integration drivers and feature support across major certified platforms.
Native Z-Wave JS
Home Assistant
Light brightness plus night-light and dimmer-speed params
Edge Driver
SmartThings
Minoston channel exposes Param 4 through 12
Built-in Dimmer Driver
Hubitat
Works out of box, Minoston driver adds night-light
S2 Verified
Amazon Alexa
Dimming via controller, Alexa sets percentage once exposed
Physical Installation & Safety
01
Step 1: Choose the Right Location
Pick an indoor receptacle beside the lamp, clear of metal shades and of any dimmer on the same circuit.
02
Step 2: Plug Into the Wall Receptacle
Push the plug fully in until it sits flush, with no power strip or extension cord in between.
03
Step 3: Connect the Load
Screw a dimmable LED or incandescent bulb into the lamp and leave the lamp's own switch on.
04
Step 4: Verify Dimming
Sweep from 100% down to the lowest level and raise the minimum brightness parameter until the bulb stops flickering.
Z-WAVE CONFIGURATION PARAMETERS
Internal register dictionary and setting options for customization.
| Parameter / Setting | Size / Type | Values & Description |
|---|---|---|
| Param 2 | 1 Byte | Default:0 (0: LED on when light off, 1: LED on when light on, 2: always off, 3: always on) |
| Param 4 | 4 Byte | Default:0 (0: disabled, 1-65535: auto turn-off minutes) |
| Param 8 | 1 Byte | Default:2 (0: output off, 1: output on, 2: out put the state after power) |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Solid blue | powered |
| Blinking blue | inclusion |
| Purple | exclusion |
| Hardware Factory Reset | Press 2x quickly, hold 3rd press 10s until LED flashes once |
Network Pairing Walkthrough
Recommended steps for smart network inclusion and initial setup.
01
Step 1: Scan the DSK Code
Open the hub's SmartStart screen and scan the 25-digit DSK code on the packaging box.
02
Step 2: Power On and Wait
Plug it in and leave it; SmartStart joins within 10 minutes, with the blue LED blinking while the hub interviews it.
03
Step 3: Tune the Parameters
Set Param 11 for minimum brightness and Param 7 for the night-light level.
04
Step 4: Test Dimming and Automation
Dim to 10%, then to full, then recall the night light with a single press.
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: Does the 800 Series dimmer need an 800 Series hub?
A: No. It is backward compatible with 500 and 700 Series controllers, but S2 and SmartStart need an S2-capable hub, and Long Range needs an 800 Series controller.
Q: The lamp flickers or buzzes at low brightness.
A: That is a minimum-brightness problem, not a fault. Raise Param 11 until flicker stops, and confirm the bulb is marked dimmable. Non-dimmable LED and CFL cannot be fixed with a setting.
Q: How far can the dimmer be from the hub?
A: About 100 ft through the mesh, or 1,300 ft line of sight in Long Range. It also repeats for other Z-Wave devices, so placing one mid-run strengthens the whole network.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MP31ZD:
Minoston MP31ZD Official User Manual
Model: MP31ZD · Installation & Parameter Specs