OFFICIAL TECHNICAL REFERENCE
Minoston MP42T User Guide & Tech Specs
Outdoor Timer Outlet with Remote Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MP42T is a non-smart photocell timer plug with a wireless remote, designed for reliable, secure control of holiday and landscape lighting. Plugged into any outdoor outlet, it switches 15A general purpose, 1,000W incandescent, 1,000W tungsten and 1/3 HP motor loads. Because there is no app and no network, the timer and the 433 MHz remote are factory-paired and nothing needs an account. A built-in photocell and a program button cover ON, 2, 4, 6, 8 hour and dusk-to-dawn modes, while TYPE 3R rainproof construction and FCC Part 15B confirm outdoor safety and radio compliance. Built for seasonal lighting, it lets you override the schedule from indoors without stepping outside.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Non-Smart (Photocell + Program Button + 433 MHz Remote)
WORKING FREQUENCY
Fixed-Frequency RF Remote (Factory Paired)
MAX ELECTRICAL LOAD
15A General Purpose / 1000W Incandescent / 1000W Tungsten / 1/3 HP
WIRELESS RANGE
Remote Range Few Dozen Feet Through a Wall
SAFETY CERTIFICATIONS
ETL Listed · FCC Part 15B
Physical Installation & Safety
01
Step 1: Choose the Right Location
Mount vertically at least 1 ft above ground and 10 ft from pools. Keep the photocell away from artificial light sources.
02
Step 2: Plug In and Secure
Plug the MP42T into a grounded 125V AC, 60Hz outdoor outlet and ensure the connection is secure
03
Step 3: Connect the Load
Plug the light fixture into the timer's outlet, then plug the timer into the GFCI outlet.
04
Step 4: Connect Your Devices
Turn on the connected devices, cover the photocell with your finger to test its response, and use the remote to verify remote-control operation.
APPLICABLE LOADS & LIGHTING SCENARIOS
Supported electrical loads, outdoor equipment, and lighting ratings.
Holiday & Landscape Lighting
Up to 1000W incandescent or tungsten
Porch & Security Lighting
Dusk-to-dawn cycle
Small Motors
Fountain pumps up to 1/3 HP
Not Recommended
Heaters, AC units, anything above 15A or 1000W tungsten
TIMER MODES & REMOTE OPERATION
Hardware settings, dial positions, and timing presets.
| Setting / Option | Mode / Type | Values & Description |
|---|---|---|
| OFF | ON | Permanent override, photocell ignored |
| 2Hrs | 4Hrs | 6Hrs / 8Hrs / On at dusk, off after that many hours |
| DUSK-DAWN | On at dusk, off at dawn; the POWER button overrides any mode |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Status Indicator | No status LED on the timer |
| Status Indicator | Relay click confirms the program |
| Status Indicator | The remote has its own indicator |
| Hardware Factory Reset | No network to reset; unplug 30s. If the remote fails, replace its battery first |
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: What should I do if the remote control fails to pair with the MP42T?
A: Make sure the battery insulation tab has been removed from the remote. Check that the battery is installed correctly and that the timer outlet is powered on. Follow the pairing instructions in the user manual and keep the remote close to the outlet during pairing. If pairing still fails, replace the battery and try again.
Q: It stopped switching after about five months.
A: Test the outlet and the load first, then re-pair the remote: hold the button on the timer until the LED blinks, then press the remote. A unit that is completely dark after five months has failed and is a warranty case.
Q: How do I pair the remote with the MP42T?
A: Plug in the MP42T and press and hold the ON/OFF button for 3 seconds until the LED indicator flashes slowly. Release the button, then press the ON or OFF button on the remote to complete pairing. Make sure the remote's battery insulation tab has been removed before pairing.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MP42T:
Minoston MP42T Official User Manual
Model: MP42T · Installation & Parameter Specs