Minoston Z-Wave 800 Series Smart Plug with Energy Power Monitor for Outdoor and Indoor (MP22ZP)

Minoston Z-Wave 800 Series Smart Plug with Energy Power Monitor for Outdoor and Indoor (MP22ZP)

Product form

$29.70

["Z-WAVE OUTDOOR ENERGY MONITORING PLUG"] SKU: MP22ZP
Quantity
−
+
Add to Cart
Buy It Now
Buy on Amazon
Description
Specifications
FAQ
Shipping & Returns
Warranty Registration
  • [Energy Efficient] Z-Wave outdoor plug comes equipped with energy monitoring capability. Monitor use and Save on bills. Enjoy a more efficient home.
  • [Z-Wave hub required] This Z-Wave outdoor plug requires a Z-Wave certified hub/ gateway. Compatible with SmartThings, Wink, Vera, Fibaro and other Z-Wave certificated hub. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS.
  • [Ideal for Outdoor] Z-Wave plug with IP65 Weather-resistant housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc--should not be exposed directly to rain or immersed in water.
  • [Schedule and Timer] You can set automatic daily timers or create on/off routing so that your devices can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident.
  • [Easy to set up] Pair Z-Wave outlet with your hub and plug in the device you want to remote control. Scan the QR code to add it to your hub. Now you can use your cellphone to turn the device on/off, schedule an event and group the things you want to control together.
  • [Z-Wave 800 Chip Plug] This zwave outlet is bulit-in a zwave 800 chip. The zwave 800 series smart plugs are more reliable and faster wireless, have a longer range and are more secure than the 700 series. It can up to 1300ft in the open range if your hub support Z-Wave LR.
PDF
Minoston Z-Wave 800 Series Smart Plug with Energy Power Monitor for Outdoor and Indoor (MP22ZP) User Manual
Official Installation, Pairing & Full Specification Guide
Quick Setup & SmartStart Pairing
A Z-Wave hub, and an outlet within 3 ft of it while you pair. Hang the plug vertically so the seal keeps water out. Up to 15A / 1875W. Your hub has to support Z-Wave S2. Anything sold in the last few years does. 1. Open your hub app and start Add Device. Hubitat: Devices > Add Device > Z-Wave. SmartThings: + > Add Device > Z-Wave. 2. Plug it into an outlet near the hub, not the one outside. The status light blinks fast, then stops when it is paired. 3. Check the app for a new plug, then move it outside and run Z-Wave repair.

Recently viewed products

    © 2026 Minoston, Powered by Shopify