The Minoston 800 Series Z-Wave Dual Outlet Plug is an excellent addition to any smart home setup! With its ability to control two individual sockets, this smart plug provides flexibility and convenience for managing your devices. The Z-Wave compatibility means it works seamlessly with platforms like SmartThings, Hubitat, and Fibaro, making integration into your existing system a breeze.Installation was straightforward, and the plug acts as a Z-Wave repeater, enhancing the range of your smart network. The on/off functionality for each socket allows for tailored control, whether you��re managing lights, appliances, or decorations. If you��re looking to expand your smart home capabilities with reliable performance and easy control, the Minoston Z-Wave Dual Outlet Plug is a fantastic choice!

This works with Hubitat no problem with the driver provided on the Minoston website.The best way to ensure you don��t have problems is to download and install the driver first, then trigger inclusion on the plug and Hubitat.The driver creates a parent and two child devices, one for each channel or outlet.You can control the whole plug (both channels) with the parent and each outlet with the children.For me at least, the driver isn��t reporting/showing the ��States�� meaning if it is on or off and the Status attribute cannot be set. Not the end of the world at this point, but the driver could use some love.I chose to include it without S2 because for my use it��s not really needed.It��s been in my mesh for four days without issue. Repeating function seems to be working nicely as all my Z-wave devices have it as a route back to the hub.It��s is ETL listed which provides some peace of mind that it hopefully burn down the house, hurt anyone, or and devices.The outlet plug is a bit long horizont

This double outlet smart plug installed quickly, without issue in Home Assistant.I��m using a Zooz Z-Wave USB stick for the hub and the ��Z-Wave JS UI�� component in Home Assistant.Installing this switch required no downloads or drivers �C here is the sequence:1. Open the Z-Wave JS UI component in Home Assistant and select ��Manage Nodes��2. Select the ��Inclusion�� option3. Press the side button on the switch 3 times in initiate pairing4. Home Assistant finds the switch5. Select it and enter the 5-digit security code located on the side of the smart plug box when prompted6. The smart plug shows up in Home Assistant as two switchesThe smart plug can be operated manually by a single press of one of the side buttons, which toggles that outlets state. A small blue LED above each outlet indicates if it is powered on, both LEDs blink when in paring mode.Bottom-line: An easy to use, compact, dual outlet smart-switch that doubles as a Z-wave repeater with full support for Z-wave Plus LR (long range)

Nicely built plug, but I cannot use it because it needs a HUB to connect, you cannot add this like most all other smart plugs.

This is the procedure I used to get both outlets to show up on ST(SmartThings). Zwave.1 The instruction sheet has a QR code that will take you to ST, Install the driver.2 On StartThings application, press +(add device)3 Scan the QR on the switch.4 When ST is ready press the LEFT manual on button quickly 2 times. This add outlet 1.5 Repeat steps 2 and 3.6 When ST is ready press the RIGHT manual on button quickly 2 times. This add outlet 2.Hope this helps.