OFFICIAL TECHNICAL REFERENCE
Minoston MP22Z User Guide & Tech Specs
Z-Wave 800 Series Outdoor Smart Plug Complete Reference
QUICK JUMP:
30-SECOND SUMMARY
Quick overview of hardware design, presets, and electrical capability.
The Minoston MP22Z is an outdoor Z-Wave 800 Series smart plug designed for reliable, secure control of exterior loads. Operating at 908.42 MHz, it supports a maximum resistive load of 15A/1,875W inside an IP65 weatherproof housing, and doubles as a signal repeater for the surrounding mesh. With Z-Wave Long Range support, it can reach up to 1,300 feet when paired with a compatible LR hub in ideal conditions. S2 authenticated security and SmartStart simplify secure setup, while ETL listing and FCC Part 15B provide added peace of mind. Compatible with Z-Wave hubs such as SmartThings, Hubitat, Home Assistant, it enables scheduled control of holiday lighting, pumps and patio equipment.
TECHNICAL SPECIFICATIONS
Core electrical ratings, RF frequency, and hardware capabilities.
WIRELESS PROTOCOL
Z-Wave 800 Series (S2 · SmartStart · Long Range Ready)
WORKING FREQUENCY
908.42 MHz (US Region)
MAX ELECTRICAL LOAD
15A 1875W Resistive or General Purpose
WIRELESS RANGE
Up to 1,300 ft (LR) · 150 ft (Mesh)
SAFETY CERTIFICATIONS
FCC Part 15B · ETL Listed
Step-by-Step Video Tutorials
Visual walkthroughs for installation, pairing, and hardware operation.
HUB & ECOSYSTEM COMPATIBILITY
Integration drivers and feature support across major certified platforms.
Native Z-Wave JS
Home Assistant
Full parameter access, no custom driver required
Edge Driver
SmartThings
Install Minoston channel for metering & multi-channel
Built-in Generic Driver
Hubitat
Import Minoston driver for full attributes
S2 Verified
Amazon Alexa
Pair through any certified Z-Wave controller
Physical Installation & Safety
01
Step 1: Choose the Right Location
Mount on a GFCI-protected outdoor outlet under an eave, at least 2 ft above grade and clear of sprinkler spray.
02
Step 2: Mount the Plug
Hook the keyhole slot over the supplied screw and anchor so the receptacles face down and water cannot pool.
03
Step 3: Connect the Load
Plug the landscape light or holiday string into the plug's own outlet and cap the unused socket.
04
Step 4: Verify Power and Control
Confirm the LED, toggle the outlet from the app, then press the GFCI test button to prove protection.
Z-WAVE CONFIGURATION PARAMETERS
Internal register dictionary and setting options for customization.
| Parameter / Setting | Size / Type | Values & Description |
|---|---|---|
| Param 1 | 1 Byte | Default:00 (00: LED on when load on, 01: LED on when load off, 02: LED disable) |
| Param 2 | 4 Byte | Default:0 (0: disabled, 1-65535: auto turn-off minutes) |
| Param 6 | 1 Byte | Default:2 (0: always off after outage, 1: always on, 2: restore last state) |
Button Operations & LED Indicators
| Status / Indicator | Description / Physical Feedback |
|---|---|
| Solid blue | powered & on |
| Blinking blue | inclusion |
| Purple | exclusion |
| Red | network failure |
| Hardware Factory Reset | Press 2x quickly, hold 3rd press 10s until LED flashes once |
Network Pairing Walkthrough
Recommended steps for smart network inclusion and initial setup.
01
Step 1: Scan the DSK Before Mounting
Pair near the hub first, then scan the 25-digit DSK code on the packaging box; mounting it outside before pairing is the usual failure.
02
Step 2: Power On and Wait
Plug it into the GFCI outlet and leave it; SmartStart joins within 10 minutes, with the blue LED blinking during the interview.
03
Step 3: Tune the Parameters
Set Param 6 to 2 so the lights restore after an outage, and Param 2 for the auto-off timer.
04
Step 4: Test Control and Automation
Run one schedule from the app, then re-run a network heal if you moved it far.
Troubleshooting FAQs
Direct solutions to common network, protocol, and pairing questions.
Q: Does it work without internet, and with which hubs?
A: It is Z-Wave, so it needs a certified controller such as SmartThings, Hubitat, Home Assistant or Amazon Alexa. Automation keeps running locally if the hub does. It is not a Wi-Fi plug, so Alexa and Google need that hub in front of them.
Q: It worked all summer and went offline after a storm.
A: Outdoor devices drop when the mesh loses power. Check the outlet has power and run a network heal. If the plug itself is dark, press once; no LED means it has failed and needs replacing.
Q: How far can an outdoor plug be from the house?
A: 150 ft through the mesh, 1,300 ft line of sight on Long Range. Exterior walls cut mesh range sharply, so pair it near the hub first and re-run a network heal after mounting.
Manuals & Technical Downloads
Official PDF documentation and engineering resources for Minoston MP22Z:
Minoston MP22Z Official User Manual
Model: MP22Z · Installation & Parameter Specs