Minoston Z-Wave Smart Dimmer Plug 800 Series for Indoor (MP21ZD)

Minoston Z-Wave Smart Dimmer Plug 800 Series for Indoor (MP21ZD)

Fiche produit

$25.49

["800 SERIES DIMMER INDOOR PLUG"] SKU: MP21ZD
Quantity
−
+
Add to Cart
Buy It Now
Buy on Amazon
Description
Specifications
FAQ
Shipping & Returns
Warranty Registration
  • [Reliabble 800 Series Zwave Outlet] Built-in an 800 series chip. This zwave plug has better signal coverage than ever, and faster communication, with S2 authenticated security and SmartStart for effortless pairing. Extend the wireless coverage up to 1300ft if your hub supports Long Range
  • [Z Wave Dimmer] Supports dimming from 1-100% brightness. The lights connected to the zwave dimmer plug can be adjusted to the brightness of that ideal ambiance
  • [Easy to Setup and High Security] SmartStart pre-programmed z-wave outlet switch only needs to be scanned and press the button 3 times to add devices (Less than 1 min). The high security of S2 ensures your privacy and is not easily attacked by hackers
  • [Wireless and Voice Control] Connect the zwave plug to the z-wave hub (sold separately) and then you can use an app to remotely control it through the z-wave controller. Voice control it by saying "Adjust light to 75% brightness. Compatible with Alexa and Google Assistant(hub required)
  • [Timer Schedule] Support timer and schedule setting. Allow the zwave dimmer plug to be turned on or off automatically, or adjust to a specific brightness at a specific time
  • [Require a Z-Wave Hub (sold separately)] This zwave smart plug is compatible with SmartThings, Hubitat, Vera, Wink, Z-Box Hub, Fibaro, Ring, 2GIG, HomeSeer, ect.CANNOT connect directly with ECHO PLUS
PDF
Minoston Z-Wave Smart Dimmer Plug 800 Series for Indoor (MP21ZD) User Manual
Official Installation, Pairing & Full Specification Guide
OTA
Minoston Z-Wave Smart Dimmer Plug 800 Series for Indoor (MP21ZD) Official Firmware
Version: V8.01 · Direct Binary for Hub/Controller OTA Update
Quick Setup & SmartStart Pairing
A Z-Wave hub, a lamp with a dimmable bulb, and the plug within 3 ft of it. Dimmable LED up to 100W, incandescent up to 200W. Your hub has to support Z-Wave S2. Anything sold in the last few years does. 1. Open your hub app and start Add Device. Hubitat: Devices > Add Device > Z-Wave. SmartThings: + > Add Device > Z-Wave. 2. Plug the lamp in, then press the button 3 times fast. The status light blinks fast, then stops when it is paired. 3. Check the app for a new plug, then rename it. Tap once for on/off, hold to dim.

Recently viewed products

    © 2026 Minoston, Commerce électronique propulsé par Shopify