Z-Wave Plug-in Dimmer(MP21ZD)
  • Z-Wave Mini Dimmer Plug

    Z-Wave Plug Dimmer Smart Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible, 200W(MP21ZD)

Z-Wave Plug Dimmer Smart Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible, 200W(MP21ZD)

  • Z-Wave Hub Required: This Z-Wave plug outlet smart outlet plug is compatible with Samsung Smart Things, the Wink Hub, and all certified Z-Wave controllers. This is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED Z-Wave HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS!
  • 1-100% Dimming and Voice Control: Z-Wave Dimmer plug customizes lighting output and creates the perfect ambiance for any room. Adjust the light brightness from 1-100% by voice commands. Compatible with Amazon Alexa, Google Assistant. Just say:“Hey Alexa, set the lights to 75%”.
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life.
  • Wireless control: A large range of types of dimmable light bulbs are supported to be wirelessly controlled like lamps or dimmable LED lights from anywhere and any time by your mobile devices. Home automation is from a little Z-Wave Plug to control lights that you want.
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. Space-saving design leaves the top second outlet free for continued use. Z-Wave Frequency: 908.42MHz.

$26.99 $24.99

Out of stock

Z-Wave Plus Smart Dimmer Plug-1 Polarized Outlet wirelessly schedule, control and adjust the brightness of any dimmable table or floor lamp – Customizes lighting output and creates the perfect ambiance for any room. Control and dim from anywhere, at any time with a smartphone, tablet, PC or Z-Wave remote or control lighting on location with the manual push-button control. Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, HomeSeer, Vera.

  • Space-saving design does not block the second outlet or obstruct furniture placement.
  • 1-100% Dimmability: cuts energy costs and extends bulb life.
  • Grounded 3-wire power connection for safety.
  • Built-in Z-Wave Plus signal repeater to extend network range.
  • 700 Z-Wave chip for reliable wireless communication
  • Z-Wave certificated hub/gateway required!

Mini Size

Only 1.9*1.9*1 (inch) in size.

Mini size design makes it portable and you can make the most of your wall outlets.

Compact size gives full access to the second outlet in a standard receptacle. This Z-Wave mini outlet can be used without blocking the outlet it’s installed next to.

Even you can plug it in a extension cord! Never Uncrowded & Uncomplicated.

Wide Usage

200W Max load for use with wide varieties of lamps and lights. Work with all dimmable LED, CFL, halogen, incandescent bulbs. Can not connect with fans.

Z-Wave certified.

FCC listed for quality and safety.

1-100% Dimming Range

1-100% Dimming Range can access you to Create an atmosphere on different occasions with desired brightness. Easily adjust the brightness level by talking with Alexa: ” Alexa, set the strip light to 80%.”

Built-In Signal Repeater

All Minoston Z-Wave lighting controls can act as a built-in signal repeater and range extender that strengthen and extend your homes Z-Wave network! (Repeats the signal up to 150 feet.)

How to Add MP21ZD to SmartThings HUB

Check to make sure you’re following the right steps for manual or auto-inclusion since the inclusion process for each is a little different.

The MP21ZD is a dimmer plug with a built-in temp sensor and is officially integrated with SmartThings, so you’ll be able to use it remotely out of the box. However, we recommend installing the custom device handler to access the right functions.

With the handler installed, you can proceed to auto-include or manually include your MP21ZD dimmer plug to SmartThings.

Here’s how to add the handler.

Log in here with the information you use for your ST app.

Click on My Device Handlers in the top menu

In the top right corner, click on “Create new device handler” and choose “from code” from the top tab menu. You’ll be presented with a blank area where you can paste the code for the handler. Please check this link to access the code, then copy ALL of the code from the page.

Once copied, paste it into the blank window on the SmartThings page.

Next, scroll to the bottom and click “create“.

Now click save, then click publish > “for me“.

Once you see the handler on your list of device handlers, include the dimmer plug by following the inclusion steps.

Manufacturer Minoston
Item Weight 7 ounces
Package Dimensions 4.45 x 2.28 x 2.17 inches
Is Discontinued By Manufacturer No
Voltage 120 Volts
Wattage 200 watts
Certification FCC
Batteries Included? No
Batteries Required? No

Copyright © 2020 Minoston | All Rights Reserved | Designed by Nocti